201 stainless steel sheet
Jawaysteel stocks 201-2B Cold Rolled Mill Finish Stainless Steel Sheet. In general grade 201 alloy is a high performance austenitic stainless steel formulated to have a lower and more stable cost due to the substitution of manganese for a portion of the nickel used in 300 series stainless steels such as Type 304. In addition, the chemical composition of alloy 201 provides higher annealed mechanical properties than type 304 which can result in an additional benefit of weight reduction. The 201 tensile strength is about 10% higher than Type 304 which may allow for thinner gauges and therefore less material. However, due to the lower Chromium and Nickel content, Type 201 stainless may not have the same corrosion resistance as Type.
Nominal Composition
C: 0.15 max
Mn: 5.50 – 7.50
P: 0.060 max
S: 0.030 max
Si: 1.00 max
Cr: 16.0 – 18.0
Ni: 3.5 – 5.5
N: 0.25 max
Fe: BAL
Physical Properties
Density:0.283 lb./in3 / (7.81 g/cm3)
Modulus of Elasticity (E):28.6 x 103 ksi / (197 x 103MPa)
Coefficient of Expansion:10.2 x 10-6 microinches/in.-°F (70-600°F) / (18.4 μm/m-°C) (20-300°C)
Electrical Resistivity:27 μ ohm.in / (68.5 μ ohm.cm)
Thermal Conductivity:9.4 Btu-in./ft.2hr.-°F / (16.2 W/m-K)
Applicable Specifications:ASTM A240, ASTM A666
Typical Mechanical Properties – Typical Room Temperature Mechanical Properties
Typical mechanical properties are based on ASTM A240
Condition:Annealed (Min)
Tensile Strength Min (UTS):75 ksi (515 MPa)
Yield strength:0.2% YS Min38 ksi (260 MPa)
Elongation% in 2” Min (50.8 mm):40%
Hardness Rockwell:95 HRBW (Max)
Uses of Stainless Steel 201
Stainless steel grade 201 is a mid-range product typically found in appliances, cookware, sinks, kitchen utensils, and food service equipment. It is also found in automotive parts and clamps as well as railroad cars, and window trim. Its structural integrity and makeup make it ideal for uses in these industries. It tends to not be a good choice, however, for outdoor structural use, because it is susceptible to pitting and crevice corrosion from certain elements like salt water.
Company information:
Jawaysteel Co., Ltd., founded in 1998, is a professional manufacturer and global exporter specializing in stainless steel and normal steel manufacture and exportation.Our plant now covers a land area of 18000 square meters, with 160 employees and 19 technicians.
Contact:
Web:www.jawaysteel.com
Tel No: 0086-21-36360955 /36360933/36361733/36361755
Fax No: 0086-21-36361766
Mob: 0086 13816774351
E-mail:806@jawaysteel.com
Skype:jawaysteel806
Wechat:0086 13816774351
Address: Suite 15G,Yongrong Enterprise Center,No.1111 Liyang Road,HongKou Area,Shanghai 200081,Chin
Related Products
