202 Stainless Steel Thin Steel Plate
202 stainless steel thin steel plate it means thickness of the 202 plate between the thickness of 0.2MM and 4MM,the width of the 202 stainless steel thin steel plate is between 500MM and 1400MM.
For the thin 202 stainless steel plate,the total heat transfer coefficient of cold rolled sheet 202 white steel sheet, which is in addition to the thermal conductivity of the metal, depends on the other factors, in addition to the thermal conductivity of the metal. In most cases, the heat dissipation coefficient, rust skin and metal surface condition. Stainless steel can keep the surface clean and tidy, so it is better than other metals with higher heat transfer coefficient. Eight stainless steel plate and stainless steel plate technology standard stainless steel plate corrosion resistance, bending performance and welding position toughness, cold rolled steel sheet and welding parts of the stamping process of good performance and high strength stainless steel plate and its manufacturing method.
The chemical component of the 202 stainless steel thin steel plate,in particular the above C:0.02% and below N:0.02%, containing less than 17% Cr:11%, Si, Mn, the proper contents of P, S, Al, Ni, and Mo 1.5Si meet 12 Cr = 17, 1 = Ni 30 (C N) 0.5 (Mn Cu) is less than or equal to 4, Cr 0.5 (Ni Cu) 3.3Mo = 16, 0.006 = C N = 0.030, the stainless steel is heated to 850 to 1250 DEG C, and then the heat treatment /s 1 degrees above the cooling speed of cooling.202 stainless steel thin steel plate is one kind Martensite stainless steel. In this way, the high strength stainless steel plate with high strength, high strength, corrosion resistance and bending processing performance, and high toughness of the 730MPa and the high strength, corrosion resistance and bending process performance of the martensite structure containing 12% or more of the volume fraction of the martensite can be. Further use of Mo, B and so on, it can significantly improve the welding parts of the stamping process.
Related Products
